1hp 4″ Cut Off Tool

Description

AIRCAT Pneumatic Tools 6560: 1 HP 4-Inch Composite Cut-Off Tool 14,000 RPM

• Patented Silencing Technology: Retains power while quiet-tuned exhaust keeps things quiet (89 dBA)
• Pneumatic Power Tool: 14,000 RPM; 1 HP motor
• Features: 4-inch diameter wheel; cuts 3/8-inch rolled steel / 18 gauge
• Cut-Off Tool: Ergonomic handle for the user’s ultimate comfort
• AIRCAT Line: The most significant advances in the performance of pneumatic power tools
• Brand: AIRCAT
• Manufacturer Part Number: 6560

AIRCAT 6560 1 hp cut-off tool was designed with all-around comfort and reliability in mind. Its 1 hp non-stall motor and single reduction gear works together to increase torque and stall resistance, while only emitting 89 dBa of noise. The 14,000 RPM speed and low-vibration level make the AIRCAT 1 hp cut-off tool a need to have in your toolbox. This power tool delivers 14,000 RPM with its 1 HP non-stall motor. Its patented “silencing technology” reduces noise to 89 dBA, and it has a composite grip and throttle trigger for comfort. The AIRCAT 6560 cuts 3/8-inch rolled steel / 18 gauge and features a 4-inch diameter wheel. Specifications: Free Speed (RPM): 14,000 Wheel Size (in.): 4 Motor (HP): 1 Gears: Single Reduction Cutting Capacity: 3/4″ Rolled Steel / 18 Gauge Exhaust: Rear Weight (lbs.): 1.8 Length (in.): 9.5 Air Cons. (CFM): 4.2 Rec. Hose Size (in.): 3/8 Air Inlet (in.) NPT/BSP: 1/4 The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our air tool line has a substantially reduced level of noise while retaining more power and torque. AIRCAT also incorporates a patented, ergonomically engineered handle design to relieve stress and fatigue on the operator s hands, wrists, and arms. AIRCAT includes the patented tuned exhaust muffler technology in most tools, which allows discharged air to pass without developing back pressure, thus retaining more power, while significantly reducing noise.

– Patented Silencing Technology: Retains power while quiet-tuned exhaust keeps things quiet (89 dBA)
– Pneumatic Power Tool: 14,000 RPM; 1 HP motor
– Features: 4-inch diameter wheel; cuts 3/8-inch rolled steel / 18 gauge
– Cut-Off Tool: Ergonomic handle for the user’s ultimate comfort
– AIRCAT Line: The most significant advances in the performance of pneumatic power tools

Additional information